2005 Upright LX41
Contact Us888.940.5030Log In/Register0

2005 Upright LX41

  • Category: Scissor Lift
Item Location Des Moines, IA
  • Item #: 05RE256
  • Unit Info: 2005 UPRIGHT LX41
  • Hours: 326
Warranty Info

888-940-5030 Contact Us Share





Similar Units:


Skid-Lift is a new product that has been developed and pairs the advantages of a scissor lift with the flexibility of a skid steer. It will easily fit on the front of a skid steer trailer for transportation along with the skid steer. The Skid-Lift has a quick attach plate on the end or as a side attachment option (see pictures below). The auxiliary hydraulic system on your skid steer provides the power for the lift and tilt. The base legs are adjustable for uneven or rough terrain. The unit will also work with many fork lifts that have external hydraulic hooks. Tractors can also be hooked up to the Skid-Lift with the use of the optional 3 point hitch adaptor plate. Model 2030E HD 20' Platform Height (25' Working Height), Includes 4 Degree Side Tilt feature, 6' x 30" Platform w/ 24" deck extension, End and Side Attach Plates included, Single End Access Doors. See the Skid-Lift in action: https://www.youtube.com/watch?v=_MPrAtz6NFc


2004 Hyundai HL7307


2005 Jcb 506C


2018 Asv RT65AWC

All Weather Cab Radial Loader Arms Loader Control: Right- hand pilot hydraulic joystick controls loader lift/tilt, with variable control of auxiliary hydraulics Drive Control: Left-hand pilot hydraulic joystick controls machine speed and direction Glass Door and Side Windows Hydraulic Quick Attach 2 Speed Radio Emissions Controls: Meets All U.S EPA Tier 4 Final Standards


2018 Asv RT75 AWC

UNDERCARRIAGE Track type: General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Track width Standard - 18 in. | 475 mm Optional Wide Track - 20 in. | 508 mm Length of track on ground 71 in | 1803 mm Ground contact area 2,556 in2 | 1.65 m2 Drive system Two hydrostatic direct drive sprockets controlled by a single joystick Track drive sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage suspension Two independent torsion axles per undercarriage Roller wheels 24 high-density polyurethane and rubber wheels per track Wheels include sealed bearings Roller wheel diameter: Front and rear wheels Middle wheels 15 in. | 381 mm 10 in. | 254 mm RT-75 AUX. HYDRAULIC SYSTEM Pump capacity: Low - variable from 0-22.6 gpm (85.5 lpm). High - 35.7 gpm (135 lpm) System pressure, max. 3,300 psi | 22 750 kPa Controls Intermittent via joystick button or continuous via console switch, mode selectable via dash-mounted switch Couplers Push-to-connect quick couplers mounted on loader arms Pressure relief valve mounted to coupler block Cooling system High efficiency side-by-side radiator and oil cooler ELECTRICAL SYSTEM Nominal charge 12 V Battery 950 CCA Charging system 120 amp alternator Outlets 1-12 V port inside operator station Wiring Pre-wired for all factory-available accessories OPERATOR STATION Seat: Adjustable contour vinyl with built-in operator presence switch, lap bar and 2 in | 51 mm wide seat belt Loader control: Right-hand pilot hydraulic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic Drive control: Left-hand pilot hydraulic joystick controls machine speed and direction Engine speed Hand-operated throttle Machine display Engine RPM Engine coolant temperature Engine oil pressure Hydraulic oil temperature Battery voltage Hour meter Fuel level ROPS Meets SAE J1040 MAY94, ISO 3471 FOPS Meets SAE J1043 SEPT87, ISO 3449 Illumination 2 - Fixed forward-facing halogen lights 2 - Adjustable rear-facing halogen lights 1 - Interior light Convenience 12 V power port Horn Backup alarm


View All
By using this site, you agree to our updated Privacy Policy


Vander Haag's Inc has multiple midwest locations with Service Shops, Part Sales, and is a licensed Truck & Trailer Dealer. Click on a location for more information. Locations include: