2018 Asv VT70

Description

Price is for base unit only. OPERATING SPECIFICATIONS Loader arms Vertical Operating weight 8,060 lbs | 3656 kg Shipping weight 7,339 lbs | 3328 kg Ground pressure @ operating weight 4.6 psi | 31.7 kPa Rated operating capacity, 35% of tipping load 2,328 lbs | 1056 kg Operating capacity, 50% of tipping load 3,325 lbs | 1508 kg Tipping load 6,650 lbs | 3016 kg Travel speed, maximum - 1st speed 7.7 mph | 12.4 kph Travel speed, maximum - 2nd Speed 11 mph | 17.7 kph ENGINE Type Diesel, 4-cylinder, aftercooled, turbocharged Model Kubota V2403-CR-TIE4 Displacement 148.5 in3 | 2.43 L Gross power rating @ 2800 rpm 65 hp | 48.6 kW Torque, peak 146 ft-lb | 198.5 Nm Cooling system Temperature-controlled variable speed hydraulically-driven fan and coolant/anti-freeze-filled radiator Intake air cleaner Dual stage Emission controls Meets all U.S. EPA Tier 4 final standards UNDERCARRIAGE Track type: General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Track width 15 in. | 381 mm Length of track on ground 59 in | 1499 mm Ground contact area 1,770 in2 | 1.14 m2 Drive system Two hydrostatic direct drive sprockets controlled by a single joystick Track drive sprockets Elevated with low-friction, replaceable sprocket rollers Undercarriage suspension Two independent torsion axles per undercarriage Roller wheels 24 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings. Roller wheel diameter: Front and rear wheels Middle wheels 14 in. | 355.6 mm 10 in. | 254 mm * Machine tested with foundry bucket VT-70 AUX. HYDRAULIC SYSTEM Pump capacity: Low - variable from 0 - 23 gpm (87.1 lpm) Optional High Flow - 28.4 gpm (107.5 lpm) System pressure, max. 3,300 psi | 22 753 kPa Controls Variable flow via joystick rocker switch, or continuous via console switch Couplers Push-to-connect quick couplers mounted on loader arms Pressure relief valve mounted to coupler block Cooling system High efficiency side-by-side radiator and oil cooler ELECTRICAL SYSTEM Nominal charge 12 V Battery 800 CCA Charging system 90 amp alternator Outlets 1-12 V port inside operator station Wiring Pre-wired for all factory-available accessories OPERATOR STATION Seat: Adjustable contour vinyl with built-in operator presence switch, lap bar and 2 in | 51 mm wide seat belt Loader control: Right-hand pilot hydraulic joystick controls loader lift, lower and tilt, plus variable control of auxiliary hydraulic Drive control: Left-hand pilot hydraulic joystick controls machine speed and direction Engine speed Hand-operated throttle Machine display Engine RPM Engine coolant temperature Engine oil pressure Hydraulic oil temperature Battery voltage Hour meter Fuel level ROPS Meets SAE J1040 MAY94, ISO 3471 FOPS Meets SAE J1043 SEPT87, ISO 3449 Illumination 2 adjustable forward-facing halogen lights 2 adjustable rear-facing halogen lights 1 Interior light Convenience 12 V power port Horn Backup alarm

Item #:	ASVVT70
Category:	Skid Steer

Item Location Spencer, IA

Specifications

Item #:	ASVVT70
Unit Info:	2018 ASV VT70
Engine:	Kubota V2403-CR-TIE4
Horsepower:	65
Hours:	0
Attachments:	67" dirt bucket
Other:	Block heater, attachment control kit
Fuel Type:	Diesel
Lift Capacity:	Tipping load 6650 lbs ROC 2,328 lbs
Reach:	126.5"
Controls:	Pilot Joysticks
Rear Tires:	Track Length 59" on Ground
Front Tires:	Track Width 15" 4.6 psi ground pressure
Drive:	Hydraulic

Attachments:

VT-70 Brochure - Updated Sept 2016.pdf

Warranty Info