2020 ASV VS75
Description
Price is for base unit only
OPERATING SPECIFICATIONS
Loader arms Vertical
Operating weight 8,740 lbs | 3964 kg
Shipping weight 7,925 lbs | 3594 kg
Operating capacity, 50% of tipping load 3,500 lbs | 1587 kg
Tipping load 7,000 lbs | 3175 kg
Travel speed, maximum - 1st speed 8.2 mph | 13 kph
Travel speed, maximum - 2nd Speed (optional) 11 mph | 17.7 kph
Breakout force at bucket edge 5,920 lbs | 2685 kg
Arm lifting force 6,325 lb | 2828 kg
Ground clearance, unloaded
Ground clearance, loaded
10.5 in. | 267 mm
10 in. | 254 mm
Width over tires
Width over tires with rims reversed
72 in. | 1829 mm
66 in. | 1676 mm
ENGINE
Type Diesel, 4-cylinder, turbocharged
Model Deutz TD2.9L4
Displacement 177 in3
| 2.9 L
Gross power rating @ 2800 rpm 74 hp | 55 kW
Torque, peak 192 ft-lb | 260 Nm
Cooling system Engine-driven fan and coolant/
anti-freeze-filled radiator
Intake air cleaner Dual stage
Emission controls Meets all U.S. EPA Tier 4 final
standards
DRIVE TRAIN
Drive system Hydrostatic
Chain case Bow tie drive system
Chain size 100 ANSI chain
Wheel size 12x16.5
Tractive effort 8,800 lbs | 3995 kg
* Machine tested with foundry bucket
VS-75
AUX. HYDRAULIC SYSTEM
Pump capacity 26 gpm | 98.4 lpm
Optional - 30.9 gpm | 116.9 lpm
System pressure, max. 3,335 psi | 230 bar
Controls Intermittent via joystick button or continuous
via console switch, mode selectable via
dash-mounted switch
Couplers Push-to-connect quick couplers mounted on
loader arms
Pressure relief valve mounted to
coupler block
Cooling system High efficiency side-by-side radiator and
oil cooler
ELECTRICAL SYSTEM
Nominal charge 12 V
Battery 800 CCA
Charging system 95 amp alternator
Outlets 1-12 V port inside operator station
Wiring Pre-wired for all factory-available accessories
OPERATOR STATION
Seat: Adjustable contour vinyl with built-in operator presence switch, lap
bar and 2 in | 51 mm wide seat belt
Loader control: Right-hand pilot hydraulic joystick controls loader lift/
lower and tilt, plus intermittent control of auxiliary hydraulic
Drive control: Left-hand pilot hydraulic joystick controls machine speed
and direction
Engine speed Foot throttle
Machine display Engine RPM
Engine coolant temperature
Engine oil pressure
Hydraulic oil temperature
Battery voltage
Hour meter
Fuel level
ROPS / FOPS Meets ISO 3471, ISO 6683,
ISO 3449:2005 Level 1
Illumination 4 - Fixed forward-facing halogen lights
2 - Adjustable rear-facing halogen light
1 - Interior light
Convenience 12 V power port
Horn
Backup alarm
Sound insulation
Rear window
See more details
| Item #: | ASV VS75 |
| Price: | $0.00 |
Category: | Skid Steer |
Item Location
Spencer, IA
Specifications
| Item #: | ASV VS75 |
| Price: | $0.00 |
| Category: | Skid Steer |
| VIN: | VS75 |
| Vehicle Info: | 2020 ASV VS75 |
| Engine: | Deutz TD2.9L4 |
| Horsepower: | 74 hp |
| Attachments: | None |
| Other: | Block heater, Attachment control kit |
| Fuel Type: | Diesel |
| Air Conditioning: | No |
| Heat: | No |
| Lift Capacity: | Tipping load 7,000 lbs ROC 3,500 lbs |
| Reach: | 130" |
| Controls: | Pilot RH Joystick Attachment Controls, LH Joystick Drive |
Attachments
×
Warning
If you modify your cart, a new freight request form must be filled out.
Browse
Locations
Vander Haag's Inc has multiple midwest locations with Service Shops, Part Sales, and is a licensed Truck & Trailer Dealer. Click on a location for more information. Locations include:
