Description: 2018 unit with Cold Weather Cab CWC
Operating weight: 3,600 lb / 1633 kg
Ground pressure @ operating weight: 3.0 psi / 20.7 kPa
Rated operating capacity (35% tipping load): 665 lbs / 302 kg
Tipping load: 1,900 lb / 862 kg
Travel speed, max.: 5.3 mph / 8.5 kph
Type: Diesel, 3-cylinder, naturally-aspirated
Model: Perkins 403D-15
Displacement: 92 cu. in. / 1.5 L
Gross power rating @ 2800 rpm: 32.7 hp / 25.1 kW
Emission controls: Meets all US EPA Tier 4 final standards
Track type: General purpose track costructed of rubber compound with embedded co-polymer cords and all-purpose treads. A smooth-tread "Turf Track" is optionally available. A single row of rubber track lugs is molded into the track.
Track width: 11 in. / 279 mm
Length of track on ground: 55 in. / 1397 mm
Ground contact area: 1183 sq. in. / .79 sq. m.
Drive system: Two hydrostatic direct-drive sprockets conrolled by a single joystick.
Track drive sprockets: Elevated, with low-friction, replaceable sprocket rollers.
Undercarriage suspension: Two independent torsion axles per undercarriage (side).
Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels have sealed roller bearings.
Roller wheel diameter: 10 in. / 254 mm
Pump capacity: 10 gpm / 37.9 lpm
System pressure, max.: 3,000 psi / 20684 kPa
Controls: Intermittent via button on loader control joystick or continuous via dash-mounted switch.
Couplers: Push-to-connect quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block.
Cooling system: High-efficiency hydraulic oil cooler beside (not stacked) engine radiator.
Nominal charge: 12 V
Battery: 630 CCA
Charging system: 65-amp alternator
Convenience outlet: One 12-VDC port inside operator station
Wiring: Pre-wired for all facrtory-available accessories
Seat: Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2-inch (51 mm) wide seat belt. An adjustable suspension seat is optional.
Loader controls: Right-hand pilot operated hydraulic joystick controls loader lift, lower and tilt. Joystick also has intermittent control button for auxiliary hydraulics.
Drive control: Left-hand pilot-operated hydraulic joystick controls machine speed and direction.
Engine speed: Hand-operated throttle lever.
Indicators & gauges: Engine oil low-pressure light; Hydraulic oil high-temp light; Engine high-temp light; Low battery voltage light; Hourmeter; Fuel gauge.
ROPS: Meets SAE J1040 MAY 94 and ISO 3471.
FOPS: Meets SAE J1043 SEPT87 and ISO 3449.
Illumination: Four fixed forward-facing halogen lights; one adjustable rear-facing halogen light; one interior light.
Audible alarms: Horn and back-up alarm are standard.
Fuel tank: 10 gal / 37.9 L
Hydraulic tank: 8 gal / 30.3 L
Engine coolant / antifreeze: 1.5 gal / 5.6 L
Engine oil, including filter: 6.3 quarts / 6 L
The following attachemnts are available as options:
Auger drive and bits
Brush cutter, rotary
Power box rake
- VIN: ASVRT030CJDS08019
- Item #: 18AS004
- Unit Info: 2018 ASV RT30 CWC
- Assembly Info: ASV RT30 CWC
- Engine: Perkins 403D-15
- Horsepower: 32.7 hp
- Hours: 1
- Fuel Type: Diesel
- Air Conditioning: No
- Heat: Yes
- Lift Capacity: 1,900 lbs tipping load 665 lbs ROC
- Controls: Pilot
- Rear Tires: 11" Tracks
- Front Tires: 11" Tracks
- Drive: Hydrostatic 6.5 mph
- All Unit Items
Parts Book RT-30 _ R070T Parts Book.pdf
We have transportation quotes and financing available. Call to find out how we can help you!